Atmizoo SnailTank – Boro Tank Alternative
$26.99
Free US Shipping Over $77*
- Extra 20% OFF all Clearance! code: EXTRA20
- No Hassle Refunds
- Secure Payments
Description
Atmizoo SnailTank – Boro Tank Alternative
The SnailTank from Atmizoo is a Boro tank alternative made from PCTG. It consists of two main parts, a tank section and an adapter (base), plus some extra custom silicon gaskets. The tank section is cross compatible with the VapeSnail tank kit, while the adapter (base) essentially takes the place of the VapeSnail deck to create a hosting base for the Boro bridges. Tank section and adapter together create a form with outer shape which is almost identical with the classic Boro tank.
The SnailTank can be refilled through a large refill hole placed at the front upper side. It allows access to the RBA deck even when almost full with juice, any time, in the case of VapeShell and all bridges with a similar collaboration between chimney and deck (non-threaded, not extra tight via o-ring intervention between the two parts). Last but not least, it features a Chimney Gasket, which is added on the top side of the tank section to adjust the hole to the diameter of Boro standard bridge chimneys and offer some extra advantages. Among other things, it seals with the AIO 510 nut, even if you remove the sealing O ring that most nuts or hybrid drip tips have.
This eliminates two issues:
- The usual pain when the chimney of the bridge is automatically lifted up while unscrewing the nut / hybrid drip tip
- The bad sealing that most hybrid drip tips present, either because of normal tear and wear, or due to bad choice of O rings (or even no presence of O rings at all)
Due to its design, the SnailTank is compatible with most bridges, RBAs and condensation plugs that are designed for the Boro tank (eg the Velvet Vape Boropad works perfect), also fitting inside the overwhelming majority of Boro compatible AIOs out there. We have tried to achieve cross-compatibility of the tank section with the VapeSnail. This, together with its pyramid-like shape due to the unavoidable draft angle of the molding process, made the tank a bit less spacey. For this reason, very large RBAs (indicatively Haku Xeta, SVT Crossbow, Hellfire Exocet v2) are expected to fit with zero tolerance inside the SnailTank. This won’t affect functionality but might leave a friction mark on the inner walls of the tank after insertion / removal of these large RBAs. The inner walls minimum width of the tank section is 13.70mm, so any RBA with smaller width than that will fit fine.
The SnailTank is made of a special medical grade co-polymer plastic called PCTG. It’s the same plastic that is used for approved baby bottles and medical appliances, FDA approved, totally safe, as it is BPA free and 100% resistant against cracker liquids (citrus, menthol etc.) unlike other plastics (PCTE, polycarbonate, plexi glass etc.).
Pro Tip: It is advised to remove the hybrid drip tip O ring or the 510 nut O ring to enjoy the best out of the SnailTank.